31.07.2012 • Product

CEM Systems: intelligent multi-technology card reader S610

Photo

CEM Systems: intelligent multi-technology card reader S610. The S610 reader marks a new hardware platform within the CEM S600 range of intelligent readers.

Available in versions supporting serial connectivity (S610s) or on-board Ethernet connectivity (S610e), the readers feature a newly designed IP 65 rated enclosure and support a range of card technologies including 125 KHz proximity, 13.56 MHz MiFare and Inside PicoPass.

The benefits at a glance are:

  • Multi-technology option – simultaneously reads both proximity and MiFare smart cards to enable clients to easily migrate from traditional proximity to smart card technology, 
  • modern enclosure – complements the architectural design of modern office buildings, 
  • offline card validation – large internal database to provide access control at all times, even if communication is lost from the host system server, 
  • LCD graphical display screen – cardholders receive messages of card swipe responses on a graphical display screen e.g. Access Denied, 
  • selection of ‘door modes’, 
  • S610 has pre-defined door modes such as ‚Turnstile‘ and ‚Equipment Enable‘ mode with specific door open times and alarm parameters, 
  • complete door control and ease of installation. 

Tel.: +4428 9045 6767
cem.info@tycoint.com
www.cemsys.com 

 

Artificial Intelligence

Pierre Racz: "Real Artificial Intelligence Does Not Exist"
part one of a three-part interview series

Pierre Racz: "Real Artificial Intelligence Does Not Exist"

In part one Pierre Racz, President of Genetec, is addressing why IP network video systems were the game changer in the industry and why he does not like the term AI.

Access Management

Munich’s Hofbräuhaus Adds Digital Key-based Access Management
Historic Munich Building

Munich’s Hofbräuhaus Adds Digital Key-based Access Management

Munich’s Hofbräuhaus enjoys an iconic status, as both a heritage property and a spiritual home for lovers of German beer.

Top-Feature

most read

Photo
12.03.2024 • Product • Safety

HVI Light Plus for Lightning Protection Applications

When installing bare, uninsulated air-termination conductors on the roof, the separation distance to electrical and metal systems installed under the roof surface must be maintained in accordance with the current lightning protection standard DIN EN 62305-3. Cable installations, pipe systems or metal parts are frequently installed under the roofing in direct proximity to the air-termination system / down conductor, thus posing a proximity issue. The solution is isolated air-termination systems with high-voltage-resistant, insulated down conductors.

Photo
12.03.2024 • Product • Safety

DEHNventil ACI M: Standard-compliant Surge Protection in Industry

High demands are placed on the availability of switchgear in, for example, industrial plants, data centres, hospitals and large administrative buildings. This makes surge protection essential. At the same time, replacement of the surge protection module should not influence system availability. The new DEHNventil ACI M TNS 264 FM has no backup fuse and is flexible in terms of its application. In the event of a fault, the protection module is safely disconnected and can be quickly removed from the base part from either side or the front. The touch-safe design allows the protection module to be replaced without system downtime. The ACI technology employed also enables connection cross-sections of just 16 mm2. This facilitates installation and saves time.

Photo
19.11.2023 • Product • Security

Assa Abloy’s Ecliq Smart Key Technology Wins Prestigious 2023 Awards

​​​​​​​More than 700 international brands competed for the renowned Plus X Award this year. International and independent expert jurors selected the 2023 winners in the world’s largest innovation prize for technology, sport and lifestyle, across more than 80 industries. Assa Abloy’s Ecliq smart key-based access control solution was among them.